It’s probably safe to say that most Americans are unaware of what the term “fracking” means. If you’ve heard of it, the details can be hard to pin down due to the controversy surrounding the method of gas extraction. With mainstream movies like Gasland and The Promised Land on their side, those opposing fracking have easily buried the truth below layers of myths. Fortunately, as we no longer live in a time when Hollywood and the left are the only media outlets, understanding what fracking truly entails is not completely lost.
Fracking, as it is commonly called, refers to a process of drilling and hydraulic fracturing to retrieve oil and natural gas trapped underground. Water pressure pushes a mixture of water, sand and chemicals into shale rock, which causes fractures and allows the oil and natural gas to escape out of the well.
The fluid used in the fracking process is 99.5% water and sand. While there are hundreds of chemicals (of which many are biodegradable) that can be used in the process, the most common chemicals used are also found in your house. For instance, sodium chloride may be used and is also used in table salt. Guar gum is another chemical used in fracking and can also be found in ice cream. If you attempt to search online for a list of the chemicals that can be used in fracking, you will see pages of results claiming the industry is trying to hide what chemicals they use for various nefarious reasons. In reality, a national fracking chemical registry has been set-up online, FracFocus, that allows citizens to easily see the chemicals used in the process and why each one is utilized. The website also offers the option of searching for wells near you to see a list of the chemicals used at that site.
Fracking can cause earthquakes.
There is no scientific evidence to back up the claim that fracking causes earthquakes. As pointed out by William Leith, seismologist with the U.S. Geological Survey, “Fracking itself probably does not put enough energy into the ground to trigger an earthquake. They’re not a safety hazard. That’s really not something that we should be concerned about.” In more than 60 years and over one million wells drilled, not a single earthquake has been attributed to fracking.
Due to emissions from fracking, air quality and the environment suffer.
Not only is the EPA working with the industry to reduce the already acceptable emissions levels, they have investigated claims against fracking in various states and have yet to find the process dangerous for the environment. One study in Fort Worth found that, “the measured and estimated air pollution levels did not reach levels that have been observed to cause adverse health effects.”
In fact, carbon dioxide emissions are at their lowest level since 1992 even as consumption of natural gas has increased; no country has reduced their emissions faster than the US in the last six years.
Too much water is used in the fracking process.
For starters, only .1% of water consumption in the U.S. is used by the natural gas industry. Coal and nuclear energy actually need more water than natural gas to be produced. Of the water used for fracking, up to 30% of it is recycled and is used in new wells. Not only is it environmentally sound to recycle the water, it saves the companies money. Currently the industry is researching alternative solutions that forgo water usage completely, such as propane gel and compressed air.
Hydraulic fracturing has been used for more than 60 years and has only improved with new technologies. More than 7 billion barrels of oil and 600 trillion cubic feet of natural gas have been safely produced thus far. Over 90% of today’s wells use fracturing. It may be difficult for some to admit, but fracking is good for our country and it’s time to get on board.
Cross-posted at FreedomWorks